EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
EGW handgun mounts allow you to mount your Vortex Viper/Venom, Burris FastFire, or Docterred dot to your favourite handgun utilising the existing dovetail mount. These one piece HD mounts allow installation on some of the most popular handguns in Australia.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Minor modification may be neccessary for Rock Islands. EGW’s products should be installed and checked by a qualified and competent gunsmith.
This sight fits (including but not limited to):STI Edge (either this sight or LPA)Les Baer 1911 (adjustable rear sights)Colt Gold Cup Trophy with Bomar Rear Sight CutColt Gold Cup National Match .45acpColt Gold Cup National Match 9mmSpringfield TRP OperatorDan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)
Please verify the location of the elevation screw in your slide. The LPA has the elevation screw in the center of the dovetail cut. The Bomar has the elevation screw behind the dovetail cut.
Please See Our Common 1911 Dovetail Chart If You Are Not Sure Which Cut You Have.
Mounting Hardware:(2) 6-32 Button Head Screws(2) 6-32 Flat Head Screws(1) 6-48 TorxHeadScrew
Red Dot Fitment:Vortex ViperVortex VenomBurris Fast Fire 1, 2, 3, 4DocterADE RD3-001ADE RD3-002ADE RD3-009UTG Reflex Micro DotCrimson Trace CTS-1200Crimson Trace CTS-1300Sightmark Mini Shot
The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.*All ADE mounts require 6-32 x 3/8" screws.
Reviews
There are no reviews yet.