Ledlenser Worker’s Friend rechargeable work light with 4 attachments, 280 lumens

The Ledlenser Worker’s Friend work light is a great set for all DIY enthusiasts, construction workers, mechanics and other professionals who often spend time in a workshop. This Worker’s Friend is not only a regular flashlight, it also comes with four different, practical attachments. It comes with a focusable bit, mount to turn it into a walking light, a flexible attachment for difficult to reach places and an attachment for inspection.

Body

The body is enhanced with a magnetic base to make sure you can attach it to metal surfaces. You click the bits on this body. The body is also enhanced with a USP port to charge the battery. It takes approx. 3.5/4 hours to completely charge the battery. The light next to the button tells you if the battery is fully charged. Battery and charging cable are included.

Bit 1: focusable flashlight

With the first bit you turn your Worker’s Friend into a focusable flashlight. The light has the following modes:

Power: 280 lumens, beam distance of 130 m, burn time of approx. 2.5 hours.
Low: 140 lumens, beam distance of 90 m, burn time of approx. 5.5 hours.
Bit 2: Walking light

With the ‘Mount’ bit you can turn your light into a walking light. It is enhanced with a hinge to make sure you can always put the light in the most practical position. You can easily hang it from the hook. This bit has the following modes:

Power: 350 lumens, beam distance of 26 m, burn time of approx. 2.5 hours.
Low: 175 lumens, beam distance of 20 m, burn time of approx. 5 hours.
Bit 3: gooseneck

With the focusable gooseneck bit you can also light up difficult-to-reach places. This completely flexible bit is 32 cm long and has a diameter of 7 mm. It is enhanced with the following modes:

Power: 190 lumens, beam distance of 89 m, burn time of approx. 5.5 hours.
Low: 100 lumens, beam distance of 28 m, burn time of approx. 8.5 hours.
Bit 4: inspection light

Finally, the light comes with a wafer-thin inspection light bit. It is even thinner than the gooseneck bit and fits inside the smallest openings. It is approx. 40 cm long and 4.3 mm wide. This bit has the following modes:

Power: 3 lumens, beam distance of 4 m, burn time of approx. 40 hours.
Low: 1.5 lumens, beam distance of 2.5 m, burn time of approx 80 hours.