NateChrony Chronograph v2.5 – Black/Clear Polymer cover

NateChrony v2.5 – Black/Clear Polymer cover with 2 x 1/2 UNF AdaptersNOTE: Ships from Australia – delivery will take ~7-10 days.Spiders & snakes will not be included.The NateChrony v2.5Black/Clear Polymer with 2 x 1/2" UNF Adapters.The latest version of our NateChrony – this will effectively replace the v2 NateChrony as the base model.Its slightly smaller than the v2 & slightly lighter – however is overall the same size and shape of the v2.It features new and fully custom internals, and the big step up is that it has the identical hardware as the SteadyShot – however it has the regular Chrony software installed. This means you can upgrade your v2.5 NateChrony into a SteadyShot, by buying the upgraded software (additional cost).All NateChrony adapters are fully compatible with the v2.5.The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles and airsoft. We have independant lab certification – so it is accurate, affordable, super easy to use, and best of all – no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.Using your mobile phone as the screen and battery(standard 5v USB), means you get the best display on the market and never get surprised by a flat battery in your Chronograph.The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, and has four additional save slots (1,000+ shots) – all of which retain the data when power is lost. All configuration is performed via a simple web page interface (no internet required).Comes with 1x Standard and 1x Slimline adapter.Standard Adapters: Have large, easy to grip tabs to mount/unmount the adapter to the barrel – even in cold conditions while wearing gloves. However this adaptermay not work on bullpups where there is minimal clearance between the barrel thread & an airtank or accessory. If you have small clearances then use our slimlineadapters.Slimline Adapters: Have smaller grip tabs to mount/unmount the adapter to the barrel. Perfect for bullpups or where there are minimal clearances between the barrel thread & an airtank or accessory. These can be used where there is lots of clearance, however if you shoot with gloves or in the cold – the standard adapters may be an easier option to use.It can store over 1,000 shots! At least 250 in the current shot string, with 4 save slots also holding at least 250.Reads in either Metric (mps & joules) or imperial (fps & ft/lb).SpecificationsAccuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographsResolution: <0.1fps shot to shot at 1,000fpsAir powered guns onlyCO2 power can cause vapour, not recommendedMaximum caliber: ~45-50 cal (depending on power)Maximum power: 150 fpeRequirementsA 5v standard USB power sourceA device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet accessA web browser that can connect to a HTTP (not HTTPS) web page and run JavaScriptYou can test your device at natechronytest.com – ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readoutIf using a mobile phone/tablet, it should be less than 5 years old & up to dateWorking knowledge of your device, including browser and internet technologiesWorking knowledge of any additional security software installed on your deviceNOTE: if you have software or settings on your device that does not permit this – you will need to change your settings.Included with the NateChrony:The Chronograph: The thing you pop on the end & shoot throughPremium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connectorThe Software: Either the standard software, or the Airsoft version of softwareBarrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifleSafety Carabiner: Allows you to secure the chrony for added safety or convenienceSoft Case: A carrying pouch to put it inTest Pellet: A plastic pellet for the drop testPhillips Driver: A phillips driver for the adapter grub screwWhat you also need to make it work:Device: A device with Wi-Fi & a web browser, i.e. Mobile phone, tablet, laptop, PC anything!Battery: (Optional) Some iPhones dont provide USB power, so a usb battery pack may be required