Machine translated
Pressure regulator for Hatsan Hercules PCP air rifle. This device will give you more consistent performance and improved accuracy.
The installation is really simple and straightforward. You don’t have to make any irreversible changes to your rifle. First you need to drain the air cylinder of any air and unscrew it. Then you can screw the regulator between the the air cylinder and the frame of the rifle.
If you have the regulator installed, you have to always fill the air cylinder with the Quick-Fill on the regulator. Never fill it with the Quick-Fill on the airgun. To fill it you need to also purchase the paintball coupling.
The pressure output can be adjusted with the flat head screwdriver from 100 to 150 bar. The total scale range corresponds to approximately 2/3 turn. Unscrewing, or screwing the setting screw for more than one turn may result in failure of the regulation. To increase the pressure you need to turn the setting screw counterclockwise. To decrease the pressure you must turn it clockwise.
Videos (videos are illustrative only):
Package contents
- ssure Regulator for Hatsan Hercules Pin and manometer 2×1 o-rings for bolt on pin – 2pcs 4×1 for pin and manometer – 3pcs 19×2,5 seal between the valve and the regulator body – 1pc
This Product Is Listed in the Following Categories
- Pressure Regulators
- Weapons
- Gun Accessories
Reviews
There are no reviews yet.