Streamlight Protac HL-X 88085 rechargeable flashlight, 1000 lumens

The Streamlight Protac HL-X is a bright, tactical flashlight. Small enough to easily store in your pocket, but incredibly bright when you need it. Thanks to the deep and relatively broad parabolic lens the light will use a broad beam. Great when lighting up your surroundings from up close to far away.

The light is enhanced with a versatile clip to make sure you can attach it to your jeans, backpack or jacket, either facing upwards or downwards. You can remove the clip to make sure the light feels even more comfortable in your pocket and is also easy to remove from the included holster. The head of the light contains ridges with flat sides. As such the light won’t roll off the table.

The light is made from anodized aluminium. As such the light is light-weight, but also rock-solid. The lens is made from glass. Both the lens and the casing of the light contain rubber o-rings. As such the light has an IP68 rating. As such the light is completely waterproof up to 2 metres.

Light modes, light intensity and burn time Streamlight Protac HL-X

High: 1000 lumens, 330 metres, 1 hour and 15 minutes
Medium: 400 lumens, 200 metres, 3 hours and 50 minutes
Low: 65 lumens, 80 metres, 23 hours
Strobe: 1000 lumens, 3 hours and 15 minutes

Streamlight Protac Multi-Fuel

This Streamlight Protac comes with a rechargeable 18650 Streamlight B26 lithium-ion battery. The flashlight, however, also works with two CR123A lithium-ion batteries. You charge the SL-B26 battery with the included micro-USB charging cable. Take the battery from the light to charge it.

Streamlight Ten-Tap programmable

The Streamlight Protac has one programmable button on the back of the handle. You can choose between three different configurations. The light arrives in the standard configuration: high, strobe and low. Pressing the button once will turn on the light in the highest mode. Press again and the light will turn off. Press the button halfway twice in a row (within 0.4 seconds) and you activate the stroboscope mode. Press the button three times and the light will start in the lowest mode.

There is also a configuration for only the highest mode or the highest and lowest mode. The last option is great if you don’t need the stroboscope function. To change between these configurations you quickly press the button nine times in a row. The tenth time you hold the button. The light will automatically choose the next option.