TSPROF Axicube-I V2 MS2201080 digital angle meter

The TSPROF Abrasive Holder with Axicube-One V2 is a digital angle meter that will help you determine the sharpening angle on a sharpening system. Great if you already own a K03 sharpening system, but are still looking for the functionality of the new sharpening system. It is, according to TSPROF, the first electronic angle meter, which was specifically designed for sharpening systems. Setting the angle with an accuracy of 0,1° has never been this easy or practical! At any given moment during the sharpening process you can determine the angle and, if necessary, adjust it. Also great when using sharpening stones of uneven thickness or when you need to sharpen a knife with a very complex compound grind. You can charge the internal battery of the Axicube-I via the included micro USB cable.

Features of the Axicube One V2

The V2 version has four modes instead of the single mode of the standard Axicube:

P1: Inclinometer mode
P2: Angle finder for the TSPROF Kadet and Blitz sharpening systems
P3: Angle finder for the TSPROF K03
P4: General angle finder mode

Switch between these modes by pressing both buttons at the same time for a brief period of time. Check out the video next to the product photos to learn more.

This digital angle meter is also enhanced with multiple magnets. The magnets are attached to the base, side and back of the device, two in a row.

How does the Axicube-I work?

The digital angle meter Axicube-I uses a MEMS sensor to measure the angles. The device does not directly measure the gravity, but uses a trick to do this. It actually measures how a smart part moves inside in comparison to the outside. Afterwards it converts this movement into an electric signal. This method is very reliable and is used in systems that require very accurate measurements.

The standard version of the Axicube is also available with the sharpening stone holder: TSPROF Abrasive Holder with Axicube-I.